logo

Kunde zuerst, Widmung, Innovation.

Lux-Silikon-Berufsform-Herstellungsu. Gießmaterial-Lieferant

Startseite
Produkte
Über uns
Fabrik Tour
Qualitätskontrolle
Kontakt
Referenzen
Startseite ProdukteSilikon-flüssiger Gummi

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making

  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
  • Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making
Produktdetails:
Herkunftsort: China
Markenname: MC Silicone
Zertifizierung: SGS,REACH
Modellnummer: MCPLA-H30
Zahlung und Versand AGB:
Min Bestellmenge: 240kg
Preis: negotiable
Verpackung Informationen: 20 kg, 200 kg/Trommel
Lieferzeit: 5-8 Werktage
Zahlungsbedingungen: L/C, T/T, Western Union
Versorgungsmaterial-Fähigkeit: 4000 pro Tag
Kontakt
Alle Produkte
Silikon-flüssiger Gummi (177)
Platin-Heilungs-Silikonkautschuk (215)
Tin Cure Silicone Rubber (172)
Polyurethan-Flüssigkeits-Gummi (91)
Silikon Encapsulants (18)
Leben-Casting-Silikonkautschuk (23)
Polyurethan-Schimmelkautschuk (12)
Klares Epoxidharz (27)
Dimethyl Silikon-Öl (17)
Silikon-Form-Kitt (36)
elektronisches Pottingsilikon (15)
Silikonform, die Material macht (11)
Spritzen-Silikon (3)
HTV-Silikonkautschuk (5)
Ausführliche Produkt-Beschreibung
Artikel-Nr.: MCPLA-H30 Farbe: Transparent
Härte: 30 Shore A Mischungsverhältnis: 10:1
Arbeitszeit: 90 bis 120 Minuten Aushärtezeit: 24 Stunden
Gemischte Viskosität: 40000 cps Zugfestigkeit: 6.2 MPa
Reißfestigkeit: 28 N/mm Schwindung: 0,1 %

Product Description

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Ear Plug

Description of Transparent Addtion Cure RTV2 Silicone Rubber

RTV silicone rubber is a two component elastomeric cross-linking at room temperature. The polymerization can be accelerated by heat (max. 150 C). The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Advantages of Transparent Addtion Cure RTV2 Silicone Rubber

1. Easy Curing: MCPLA-H40 polymerizes at room temperature (23C).
2. High Transparency
3. High tear and tensile strength
4. Long shelf life with low shrinkage

Applications of Transparent Addtion Cure RTV2 Silicone Rubber

Label manufacturing, Molding applications requiring low shrinkage, such as toys, jewelers, automotive, rapid prototyping etc.

Transparent Addition Cure RTV2 Liquid Silicone Rubber for Mold Making 0
Instructions for making silicone molds

1. Mixing the two components
According the mixing ratio 10: 1 weighting part A and B, the two components may be thoroughly mixed either by hand or using a low speed electric to minimize the entrance of air and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the two silicone components, further information is available upon request.

2. Molding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3 to 4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio(3 to 4 times of the initial volume)

3. Polymerization
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note: In general contact with certain materials can inhibit the cross linking of RTV.
Natural rubbers vulcanized with sulfur
RTV elastomeric is catalyzed with metal salts, e. G. Tin compounds
PVC stabilized with tin salts and additives
Epoxy catalyzed with amines
Certain organic solvents, such as Ketones, alcohols etc.

In case of doubt, it is recommended to test the substrate by applying a small quantity of the mixed silicone on a restricted area.

Storage and shelf life of Transparent Addtion Cure RTV2 Silicone Rubber

Silicone RTV must be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales specification. 

Größe und Tag:

flüssiger Silikonkautschuk für die Formherstellung,

Kondensations-Heilungs-Silikon-Flüssigkeits-Gummi,

Gestaltungsgummi des Silikons der hohen Temperatur

Kontaktdaten
MINGCHENG GROUP LIMITED

Ansprechpartner: Ms. Julie

Telefon: +86-13537275098

Faxen: 86-769-82696808

Senden Sie Ihre Anfrage direkt an uns (0 / 3000)

Schließen Sie online an
Sitemap
Produkte
Startseite
Datenschutz-Bestimmungen | CHINA Gut Qualität Silikon-flüssiger Gummi Fournisseur.
© 2021 - 2026 MINGCHENG GROUP LIMITED. All Rights Reserved.

No.2, Zhouliao-Straße, Langzhou-Industriegebiet, Changping, Dongguan, Guangdong, China

julie@mcsilicone.com

Mobile Seite

Möchten mehr über uns wissen? Treten Sie mit uns einfach in Verbindung