logo

Kunde zuerst, Widmung, Innovation.

Lux-Silikon-Berufsform-Herstellungsu. Gießmaterial-Lieferant

Startseite
Produkte
Über uns
Fabrik Tour
Qualitätskontrolle
Kontakt
Referenzen
Startseite ProdukteSilikon-flüssiger Gummi

Stone Mold Making Liquid Tin Cure Silicone Rubber

Stone Mold Making Liquid Tin Cure Silicone Rubber

  • Stone Mold Making Liquid Tin Cure Silicone Rubber
  • Stone Mold Making Liquid Tin Cure Silicone Rubber
  • Stone Mold Making Liquid Tin Cure Silicone Rubber
  • Stone Mold Making Liquid Tin Cure Silicone Rubber
  • Stone Mold Making Liquid Tin Cure Silicone Rubber
Stone Mold Making Liquid Tin Cure Silicone Rubber
Produktdetails:
Herkunftsort: China
Markenname: MC SILICONE
Zertifizierung: SGS,REACH
Modellnummer: MCSIL-2088
Zahlung und Versand AGB:
Min Bestellmenge: 240kg
Preis: negotiable
Verpackung Informationen: 5 kg, 10 kg, 20 kg, 25 kg, 200 kg/Trommel
Lieferzeit: 5-8 Werktage
Zahlungsbedingungen: L/C, T/T, Western Union
Versorgungsmaterial-Fähigkeit: 4000 pro Tag
Kontakt
Alle Produkte
Silikon-flüssiger Gummi (216)
Platin-Heilungs-Silikonkautschuk (215)
Tin Cure Silicone Rubber (172)
Polyurethan-Flüssigkeits-Gummi (91)
Silikon Encapsulants (18)
Leben-Casting-Silikonkautschuk (23)
Polyurethan-Schimmelkautschuk (12)
Klares Epoxidharz (27)
Dimethyl Silikon-Öl (17)
Silikon-Form-Kitt (36)
elektronisches Pottingsilikon (15)
Silikonform, die Material macht (11)
Spritzen-Silikon (3)
HTV-Silikonkautschuk (5)
Ausführliche Produkt-Beschreibung
Artikel-Nr.: MCSIL-2088 Farbe: Weiß
Härte: 32 Shore A Mischungsverhältnis: 100: 2
Arbeitszeit: 30-40 Min Curning-Zeit: 4-6 Std
Viskosität: 25000 ± 2000 Hz Reißfestigkeit: 28-30 N/mm
Zugfestigkeit: 4 ±0,2 MPa Dehnungspause: 450-500 %
Linearer Schrumpfung: 0,2-0,4%

Product Description

Description of Stone Mold Making Silicone Rubber

RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consists of Part A base silicone and Part B CA30 curing agent, and Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone molds: Plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc...

Features of Stone Mold Making Silicone Rubber

1. Good flowability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage

Applications of Stone Mold Making Silicone Rubber

MCSIL-2066/2088 silicone rubber is especially suited for reproduction of middle size cement molds, concrete stones, and artificial stones. etc...

Stone Mold Making Liquid Tin Cure Silicone Rubber 0


How to make the silicone mold?

1. Preparing
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

2. Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100: 2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35C (95F). It's suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

3. Pouring the mixture and curing
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

Package of Stone Mold Making Silicone Rubber

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle

Stone Mold Making Liquid Tin Cure Silicone Rubber 1


Storage of Stone Mold Making Silicone Rubber

When the RTV-2 silicone rubber is stored at or below 30 C (85F) in the original unopened containers, Silicone Base and CA30 Curing agent have a usable life of 12 months from the date of production.

Note of Stone Mold Making Silicone Rubber

RTV2 silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.

Need more information, please feel free to contact Nicole.

 
Item No.  MCSIL-2088
Color off-white
Curing agent CA30
Mixing ratio 100:2
Hardness 32-34 Shore A
Tear Strength 29 N/mm
Tensile Strength ≥3.6 Mpa


Größe und Tag:

flüssiger Silikonkautschuk für die Formherstellung,

Kondensations-Heilungs-Silikon-Flüssigkeits-Gummi,

Gestaltungsgummi des Silikons der hohen Temperatur

Kontaktdaten
MINGCHENG GROUP LIMITED

Ansprechpartner: Ms. Julie

Telefon: +86-13537275098

Faxen: 86-769-82696808

Senden Sie Ihre Anfrage direkt an uns (0 / 3000)

Schließen Sie online an
Sitemap
Produkte
Startseite
Datenschutz-Bestimmungen | CHINA Gut Qualität Silikon-flüssiger Gummi Fournisseur.
© 2021 - 2026 MINGCHENG GROUP LIMITED. All Rights Reserved.

No.2, Zhouliao-Straße, Langzhou-Industriegebiet, Changping, Dongguan, Guangdong, China

julie@mcsilicone.com

Mobile Seite

Möchten mehr über uns wissen? Treten Sie mit uns einfach in Verbindung